Canoga-perkins 9175 Command Reference Bedienungsanleitung PDF herunterladen (Seite 46)

100

101

CanogaOS Command Reference

4-2

Switch(config-line)#

This example shows how to exit vty line configuration mode

Switch(config-line)# exit

Switch(config)#

Related Commands

exit

4.3 exec-timeout

To set the interval that the EXEC command interpreter waits until user input is detected, use the

exec-timeout command in line configuration mode. To remove the timeout definition, use the no form of

this command.

Command Syntax

exec-timeout minutes [seconds]

no exec-timeout

minutes: <0-35791>: Integer that specifies the number of minutes. The default is 10 minutes

seconds:

<0-2147483>: (Optional) Additional time intervals in seconds

Defaults

10 minutes

Command Mode

Line configuration

Usage

To specify no timeout, enter the exec-timeout 0 0 command.

Examples

The following example sets a time interval of 2 minutes:

Switch(config-line)# exec-timeout 2

The following example sets a time interval to default value:

Switch(config-line)# no exec-timeout

Related Commands

None

4.4 exit(global)

To exit any configuration mode to the next highest mode in the CLI mode hierarchy, use the exit

command in any configuration mode.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 789 790

Kommentare zu diesen Handbüchern

Keine Kommentare

Canoga-perkins 9175 Command Reference Bedienungsanleitung Seite 46

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Canoga-perkins 9175 Command Reference