Canoga-perkins CanogaOS Configuration Guide Bedienungsanleitung PDF herunterladen (Seite 333)

CanogaOS Configuration Guide

Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 333 of 350

DUT(config)# line console 0

DUT(config)# line password abc123

DUT(config-line)# login

After the above setting, login the switch will need the line password, and user can try to login at

most 3 times. This is a sample output of the login prompt:

User Access Verification

Password:

44.3 Configuring the enable password

The enable password controls access to the privileged EXEC mode.

To set the enable password, follow these steps:

DUT# configure terminal Enter global configuration mode.

DUT(config)# enable password abc123 Define a new password or change an existing password

for access to privileged EXEC mode. By default, no

password is defined

To remove the password, use the no enable password global configuration command.

This example shows how to change the enable password to l1u2c3k4y5. The password is not

encrypted and provides access to level 15 (traditional privileged EXEC mode access):

DUT(config)# enable password l1u2c3k4y5

44.4 Validation

To display the co Commands nfigured users, use the show usernames privileged EXEC

command.

DUT#show usernames

Number User name Privilege Password Rsa Key

==============================================================

1 aa a 1 *

2 cc c 1 *

To display all the login information, use the show users privileged EXEC command.

DUT#show users

Line User Host(s) Idle Location

0 con 0 ccc idle 18:41:28 127.0.0.1

130 vty 0 ddd idle 00:00:53 10.10.29.20

131 vty 1 ccc idle 00:04:43 10.10.29.20

*132 vty 2 eeed idle 00:00:00 10.10.29.20

1 2 ... 328 329 330 331 332 333 334 335 336 337 338 ... 349 350

Keine Kommentare

Canoga-perkins CanogaOS Configuration Guide Bedienungsanleitung Seite 333