Canoga-perkins CanogaOS Command Reference Bedienungsanleitung PDF herunterladen (Seite 794)

100

101

CanogaOS Command Line Reference Revision 1.02

Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 794 of 855

Default

Logging file level is {4 | warning}

Usage

Specifying a severity-level causes messages only at that level and numerically lower levels to files.

Examples

In the following example, the user specifies that only messages of the levels error, critical, alerts, and

emergency be logged:

Switch(config)# logging level module 3

Related Commands

logging level file

40.67 logging merge

To enable the logging mergence, use the logging merge command in global configuration mode. To

restore to default value, use the no form of this command.

Command Syntax

logging merge {enable | disable | fifo-size size | timeout seconds}

no logging merge {fifo-size | timeout }

enable Enable logging mergence.

disable Disable logging mergence.

fifo-size size Set fifo size. The range is 100 to 10240.

timeout seconds Set timeout. The range is 1 to 300 seconds.

Command Mode

Global configuration

Default

Logging mergence is enabled

Usage

The logging merge command merges all the same logs into one during a specified time range. During

this time, the switch buffered these same logs. You can use the timeout keyword to set the time range,

and use the fifo-size to set the buffer size.

Examples

The following is sample output from the logging merge command.

Switch(config)# logging merge enable

1 2 ... 789 790 791 792 793 794 795 796 797 798 799 ... 854 855

Kommentare zu diesen Handbüchern

Keine Kommentare

Canoga-perkins CanogaOS Command Reference Bedienungsanleitung Seite 794

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Canoga-perkins CanogaOS Command Reference