Canoga-perkins 9145EMP Network Interface Device Hardware Bedienungsanleitung PDF herunterladen (Seite 36)

9145EMP Network Interface Device Hardware User’s Manual Installation

Installing the SFP Modules

3.4 Installing the SFP Modules

1. Determine which SFP Module(s) is/are required for the User and Network Ports by refer-

encing the SFP Product Data Sheet.

2. Insert a module into each available port and push firmly to seat module (Figure 3-10).

3. Raise latch to lock module in place.

Figure 3-10 SFP Modules

3.5 Connecting the Electrical Power

NOTE: When power is applied, all LED indicators will light amber.

3.5.1 AC Power

NOTE: Country specific power cords are available locally for installations outside

of North America.

The 9145EMP uses a standard IEC320 AC Power Connector. Plug the AC power cord into the

socket at the rear of the 9145EMP and plug the other end of the AC power cord into a convenient

AC outlet.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 49 50

Keine Kommentare

Canoga-perkins 9145EMP Network Interface Device Hardware Bedienungsanleitung Seite 36